Bankomat Cross-Cut Paper Shredder with Auto-Feed & Jam-Proof Security

Key Features & Operating Instructions

Smart Power & Auto-Start Operation

• Auto-Throat Safety Cut-Off: When no paper is in the throat, power cuts off automatically to prevent potential injuries. The panel switches remain inactive until reactivated.
  
  
• Automatic Paper Detection: Inserting paper into the slot automatically triggers the shredder, eliminating the need to press the rear power switch repeatedly.
  
  
• Energy-Saving Standby: Operating on 230V / 50Hz, the green power LED illuminates on startup. It enters a 5-second standby mode and powers off automatically after shredding, ensuring near-zero standby energy consumption.
  
  

Advanced Jam-Clear & Load Management

• Auto-Reverse Jam Protection: Clears paper jams automatically or using the manual REV / FWD toggle switch.
  
  
• Overload Shut-Off Guard: If capacity is exceeded, the shredder shuts down automatically with a Red LED indicator. To resume:
  
  
  1. Switch to REV to back out excess paper.
     
     
  2. Remove redundant sheets.
     
     
  3. Switch to FWD to resume normal operation.
     
     
• Paper Sizing Warning: Avoid folding paper wider than the feed entry to fit, as increased thickness can exceed recommended sheet capacity.
  
  

Built-in Safety & Indicator Lights

• Safety Interlock System: Operates only when the bin makes full contact with the built-in frame switch. If removed or ajar, the safety interlock stops all operation.
  
  
• Real-Time LED Indicators:
  
  
  • Shredding in Progress: Blinking LED light indicates active shredding.
    
    
  • Bin Open / Ajar: Indicator LED warns when the bin is misaligned or open.
    
    
  • Basket Full Indicator: Solid Red LED illuminates alongside a blue basket light when the bin reaches capacity.
    
    
  • Overheat Protection: Red LED signals automatic shutdown until the motor cools down safely.
    
    

Usage Guidelines & Warranty Protection

Important Maintenance Rules

• No Adhesive Labels: Do not shred sticky labels, envelopes with glue, or paper with labels attached. Adhesive residue gums the cutting blades, causes severe mechanical malfunction, and will void your product warranty.