✅ INSTALL GUIDE 

1. Put the machine on flat table.
2. Insert power plug into the corresponding electric socket and make sure that working voltage comply with supplying voltage.

✅ OPERATION GUIDE AND REMARKS

1. Set the slide switch to ‘AUTO’, at the time, the machine is on standby; putthe shredding paper, vertically into the entry, thereafter, it starts up automatically and does shredding; it returns to standby automatically after finishing;
2. When jamming caused by inserting too much paper, or want to withdraw the paper immediately at the normal shredding, please set the slide switch to “REV”, at the same time, the machine does the reverse rotation for about 1 second and returns the paper that has not been shredded; then put the switch to “OFF”;
3. To ensure your machine has a long use life and exerts good shredding function, please refer notice the maximum number of shred paper.
4. If the machine works continuously or spasmodically for a long time, it may pause because the inside temperature increases continuously. After resting for a period of time, it can work again;
5. Please do not put clips, adhesive paper, adhesive tapes, or clothes into the paper entry in order to avoid damaging the blades or lowering the shredding performance;
6. If you want to clean the wastebasket or the machine, or the machine is not to use for a long time, please cut off the electric power and unplug the machine.

✅ SAFETY OPERATION GUIDE 

1. Before use, please read introduction manual carefully;
2. Keep ties, jewelry, hair, etc. away from the machine to insure personal safety;
3. Do not place the machine near the heat sources or in the humid environment for a long time;
4. Please use the machine near the electric socket to unplug easily;
5. When clean the machine or repair the damaged plug, please unplug it from the electric socket at first;
6. Machine must be far away from children and pets;
7. If the machine is not to be used for a long time, please cut off the electric power and unplug.